Campers – part 2
Method :
The carrier is clamped between the 2 sides, so drilling is not necessary.
The corner between the side and the floor must be 90°.
Length alu-profile (art. MP-100X16) = width between the sides minus 3 cm.
Ex. : If the width between the sides is 98 cm, Then you have to order 95 cm alu-profile (art. MP-100X16).
Attention : Be sure the sides are strong enough, so you don’t destroy them by clamping
Carrier for MTB
Carrier for 2 MTB. Because the HIGH mount is adjustable, the FOCUS bicycle just fit under the ceiling.
Bicycles are very close to each other, so there is plenty of room left for other stuff.
2 E-bikes in Motorhome
2 E-bikes in Motorhome.
Position of the fork mounts : 1 positioned to the front and the other to the back, so the handlebar from the 2e bike is partly before this of the 1e bike.
Result : The bikes are very close to each other and there still space left for other stuff.
2 race bikes and 2 MTB's in Camper Van
Bicycle carrier in Camper Van.
Pay attention to the different positioning of the Fork Mounts, and also the different HIGH-LOW positions, so the bicycles are very close to each other, which results in space-saving.
2 E-Bikes in Camper - 01
Carrier for 2 E-bikes in a camper.
To win space, the handlebars are turned 45°.
2 E-Bikes in Camper - 02
Carrier for 2 E-bikes in a camper.
The handlebars are turned 45° to win space.
